Sunday, May 22, 2011

How to tie a flat know

Chinese Flat Knot is a great knot to use for jewelry such as bracelets or necklaces, It looks almost like a knit or weaved pattern when the knot is repeated on the same string, rope or twine over and over again.

Instructions:
  1. Place one piece of string in front of you horizontally.
  2.  Place a second piece of string on top of the first piece, vertically, making an "X" shape.
  3.  Bring the right side of the horizontal (first) piece of string towards the left side, bringing it over the vertical (second) piece of string. Pull it under the left side of the first piece of string. We will call this side A.
  4.  Bring the left side of the horizontal (first) piece of string towards the right side, under side A. Pull this under the vertical (second) string and over the loop made by side A.
  5.  Tighten both sides of the horizontal (first) piece of string.
  6.  Continue adding knots onto the vertical piece of string with the horizontal piece until you have completed your project.

Sunday, March 27, 2011

Pan Chang Knot



Sunday, March 20, 2011

How to tie a Pan Chang knot

Pan Chang knot, also known as the mystic knot, is considered one of the eight Buddhist treasures. Its endless pattern represents the cyclical nature of all existence, symbolizing birth and death while indicating that life can exist forever- one of the basic beliefs of Buddhism. This intricate design is also used to represent the mysteries of the universe, and it is thought to bring good fortune to the wearer as well as those who view it.

You will need 2mm satin cord at least 4 feet long.

Instructions:
Step 1: Make a bight in the middle of the rope.
Step 2: Drop two opposing bights beside the middle bight.
Step 3: Hook the right running end down, then left under, over, under.
Step 4: The rope end over the vertical ropes. Then slither the running end back.
Step 5: The above rope end set forth, following the same path as the line above.
Step 6: Repeat above line three times.
Step 7: Now hook the left running end down, then right over all.
Step 8: The end over all the vertical ropes. Hook the running end back .
Step 9: The rope end back under the vertical ropes, then curve it around the bight below.
Step 10: The end rope passing over and under the vertical ropes again.
Step 11: Hook the running end up under, over-over-over, under, and over-over-over the ropes above it.
Step 12: Hook the running end down, under-under, over, under-under-under, over, and under the ropes below it.
Step 13: Curve the running end around the bight to the right and repeat Step 11.
Step 14: Curve the running end under the middle bight and repeat Step 12.
Steep 15: Rotate all the vertical and horizontal ropes 90 degrees, creating an upper and lower lattice of woven ropes.
Step 16: Carefully adjust the knot, taking up slack in consideration of the fact that the Pan Chang Knot has an upper and lower section.
Step 17: Congratulations! You've just finished the knot.
Step 18: The Pan Chang Knot is effectively a compressed cylinder and is not meant to lay completely flat.




Saturday, March 5, 2011

Tie a cloverleaf knot for St. Patrick's Day

This knot resembles a three-leaf clover and is a symbol of good luck. It's the perfect symbol for St. Patrick's Day. This knot combined with the double knot can easily form a decoration cloverleaf knot keychain

You will need at least 12 inches length of 2mm satin cord.  

Step 1. Form the letter M with the string and hold in place with pins.   (See picture below)
Step 2. Take the right bend in the “M” and tuck it under the left leg of “M” and fasten with pin.
Step 3. Take right strand again and make a figure 8 loop the top one goes into the loop just formed in the previous step. Fasten again with pin. Also fasten the other part of the 8 with pin.
Step 4. Take the left strand slip it through the first figure 8 loop.
Step 5. Take right strand again and thread through original bottom loop from the bottom. 
Step 6. Finally take the same strand double back and bring it through the top loop again from the bottom.
Step 7. Tighten string to form the knot. 


You can also learn more on how to tie different knots from these books: 
The Complete Book of Decorative KnotsThe Complete Book of KnotsHandbook of KnotsThe Book of Decorative Knots 

Sunday, February 27, 2011

How to tie a simple double coin knot

The Complete Book of KnotsThe Double Coin Knot, also called Josephine knot, looks like two overlapping traditional styled Chinese coins which are round with a square hole in the center. This decorative knot has many applications. It can be tied with different colored threads to make attractive patterns or tied with double strands to add to its beauty. But it is not a tight knot.

Step 1 Take thread, fold a loop with right strand (end A). 
Step 2. Fold left strand over right loop and down the strand (end A).
Step 3. Weave the right strand (end B) over, under, over and under four strands. Then adjust strands and the knot is complete.

Wednesday, February 23, 2011

How to tie a double connection knot



The Complete Book of KnotsDouble connection knot is very useful for the beginning or end of any macrame knots to form elaborate design. The knot forms an X shaped figure when complete. Its primary purpose is to make a stable loop that does not loosen easily. The more you pull, the tighter it becomes.

You will need at least 8 inches of 2 mm satin cord to practice this knot. 

Step 1: Take satin cord, fold in half and fasten the midpoint with a pin. (See picture below)

Step 2: Take the strand and slip under the left strand, flip it up and then bring it done to form a loop.

Step 3:  Take the left strand and tuck under the right strand then swing over toward the left and up. 

Step 4: Take the same strand and tuck under lower loop of the knot and pull down.

Step 5: Pull both ends and the folded point at the top with equal force.